Overview

The Conrad Comax 800 belongs in the top segment with regard to its drilling performance and it is the largest combination drilling rig in the Conrad range.

The rig quality is at a considerable high level now that all techniques that have already been standardised such as drill pipe handling and automated programs can be added. The Comax 800 has been developed to be able to perform all drilling methods by radio control. The Comax 800 can be fitted out based on customer specifications for straight flush drilling, reverse circulation/airlift drilling, percussion drilling, sonic drilling, coring and Down-The-Hole drilling.

Comax 800
Boxer 200

Drilling methods

The Comax 800 can be fitted out based on customer specifications for one of the drilling methods described below.

  • Tool
    Reverse circulation drilling

    Reverse circulation drilling up to approx. 70 to 80 metres can be carried out with a reverse circulation pump and reverse circulation drilling bit diameters up to approx. 1200 mm. *

  • Tool
    Airlift

    The airlift drilling principle by using a compressor is the appropriate method to continue the reverse circulation drilling with a hole diameter of approx. 1200 mm to a depth of 650 metres. *

  • Tool
    Straight flush drilling

    Holes with a diameter of approx. 350 mm can be continued up to a depth of 650 metres by using a water, mud or foam circulation system with this drilling method. *

  • Tool
    Percussion drilling

    By equipping the Comax 800 with a rotary table and a stroke mechanism, percussion drilling is possible up to a depth of at least 180 metres with a max. casing diameter of 420 mm.

  • Tool
    Auger drilling

    The Comax 800 can drill with both hollow stem and full augers that have an outer leaf diameter of approximately 600 mm with the standard 6" drill head.

  • Tool
    Counter flush drilling

    For special activities the Comax 800 can be equipped with a counter flush system for sampling for exploration objectives to name but one example.

* Will depend on the geological and the soil conditions.

Operator convenience & comfort

Conrad Stanen has translated a lot of experiences of drilling rig operators into the operating friendliness of its designs. This ensures that productivity is increased as a whole and that it is made more pleasant for the drilling rig operator to work with the rig. A few examples of this are:


  • Full drill pipe manipulation system that ensures that drill pipes no longer have to be inserted and extracted manually (no physical load)
  • A semi or fully automatic facility for the above to ensure that manual control is limited to a minimum (operating comfort)
  • Radio remote control for all important drilling functions and setting up the drilling rig (good visibility of the drilling process and surrounding area)
  • Automatic greasing system
  • A high engine performance that increases productivity

The drilling rig operator can set himself or herself up in the area of the rig with his or her radio control unit. Inserting and extracting drill pipes are automatic tasks and do not lead to physical loads. This also prevents the risk of body parts becoming trapped.

Conrad Stanen bedieningsgemak en comfort Comax 800

Specifications



Power
Option 1 Dieselmotor P.T.O. 260 kW
Drillmast
Length 10 m
Max. safe working load 350 kN
Height under crown sheave 9 m
Pull back / Pull down systeem through hydraulic cylinder and steel cables
Stroke 7,2 m
Pull back 300 kN
Pull down 150 kN
Lifting speed 0,6 m/sec
Hydraulic hoisting winch
Thrupass 150 mm / 150 mm
Torque / Revolutions 1500 daNm bei 60 rpm
750 daNm bei 120 rpm
Hydraulische hijslier
Line pull 6000 daNm
Steel cable 100 m ø 16 mm
Lifting speed 0,5 m/sec
Centrifugal mudpump (hydraulically driven)
Rate 80 m³ / hour
Pressure 9 bar
Suction pump (hydraulically driven)
Rate 280 m³ / hour
Suction height 9 m.w.k.
Compressor (hydraulisch driven)
Rate 7 m³ / min
Pressure 13 bar
Rotary table unit
Thrupass 420 mm
Torque 4000 daNm
Revolutions 20 rpm

Additional options

  • Different drill head models
  • Larger pull back/pull down power and speed
  • Different types of winches
  • Different lit of spray pump models
  • Other rotary table units
  • Drill pipe manipulation system
  • Percussion device
  • Winch cable push-out arm
  • Crown sheaves construction that can be rotated and extended
  • Mast dump (mast height adjustment)
  • Automatic greasing system
  • Automatically operated drill pipe manipulator
  • Automatically operated restart of drilling process

Media repository

Need more information?

Can we help you with more information regarding the Comax 800 and its capacities? Please contact us at +31 (0)527 69 71 96, fill in the contact form below or download our brochure.

We treat your data safe and careful. More about this in our privacy statement

* Mandatory ……
Innovation in drilling equipment

Conrad Stanen B.V.

Address Escudo 21
8305 BM Emmeloord, NL
Phone +31 (0)527 69 71 96
Fax +31 (0)527 61 0194
E-Mail info@conrad-stanen.nl
View all contact info

Call me back

We treat your data safe and careful. More about this in our privacy statement

* Mandatory