Overview

The Conrad Boxer 200 has been developed as a powerful, compact and light crawler track-mounted drilling rig. The Boxer 200 is a very popular rig within the delivery range of Conrad Stanen.

This extremely modern rig that is solely radio operated is easy to manoeuvre due to its compact dimensions in difficult to access areas and tight environments. The Boxer 200 can be fitted out based on customer specifications for straight flush drilling, reverse circulation/airlift drilling, percussion drilling, sonic drilling, coring and Down-The-Hole drilling.

Boxer 200
Boxer 200

Drilling methods

The Boxer 200 can be fitted out based on customer specifications for one of the drilling methods described below.

  • Tool
    Reverse circulation drilling

    Reverse circulation drilling up to approx. 70 to 80 metres can be carried out with a reverse circulation pump and reverse circulation drilling bit diameters up to approx. 600 mm are feasible. *

  • Tool
    Airlift

    The airlift drilling principle by using a compressor is the appropriate method to continue the reverse circulation drilling with a hole diameter of approx. 600 mm to a depth of 225 metres *

  • Tool
    Straight flush drilling

    Holes with a diameter of approx. 250 mm can be continued up to a depth of 225 metres by using a water, mud or foam circulation system with this drilling method.*

  • Tool
    Percussion drilling

    By equipping the Boxer 200 with a rotary table and a stroke mechanism, percussion drilling is possible up to a depth of at least 100 metres with a max. casing diameter of 320 mm.

  • Tool
    Auger drilling

    By equipping the Boxer 200 with an auger drill head, auger drilling with both hollow stem and full augers with a diameter of approx. 300 to 400 mm is possible.

  • Tool
    Other

    Other drilling methods such as ‘Down-The-Hole’ drilling, coring and sonic drilling are possible

* Will depend on the geological and the soil conditions.

Operator convenience & comfort

Conrad Stanen has translated a lot of experiences of drilling rig operators into the operating friendliness of its designs. This ensures that productivity is increased as a whole and that it is made more pleasant for the drilling rig operator to work with the rig. A few examples of this are:


  • Full drill pipe manipulation system that ensures that drill pipes no longer have to be inserted and extracted manually (no physical load)
  • A semi or fully automatic facility for the above to ensure that manual control is limited to a minimum (operating comfort)
  • Radio remote control for all important drilling functions and setting up the drilling rig (good visibility of the drilling process and surrounding area)
  • Automatic greasing system
  • A high engine performance that increases productivity

The drilling rig operator can set himself or herself up in the area of the rig with his or her radio control unit. Inserting and extracting drill pipes are automatic tasks and do not lead to physical loads. This also prevents the risk of body parts becoming trapped.

Conrad Stanen bedieningsgemak en comfort Boxer 200

Specifications



Power
Option 1 Dieselmotor P.T.O. 95 kW
Option 2 Dieselmotor P.T.O. 135 kW
Drillmast
Length 6,5 / 7,5 m
Max. safe working load 75 kN
Height under crown sheave 5,8 / 6,8 m
Pull back / Pull down systeem through hydraulic cylinder and steel cables
Stroke 4,2 / 5,2 m
Pull back 40 / 60 kN
Pull down 20 / 25 kN
Lifting speed 0,6 m/sec
Hydraulic hoisting winch
Thrupass 100 mm / 125 mm
Torque / Revolutions 500 daNm bei 60 rpm
350 daNm bei 120 rpm
Hydraulische hijslier
Line pull 1500 daNm
Steel cable 50 m ø 10 mm
Lifting speed 0,5 m/sec
Centrifugal mudpump (hydraulically driven)
Rate 120 m³ / hour
Pressure 8 bar
Suction pump (hydraulically driven)
Rate 240 m³ / hour
Suction height 9 m.w.k.
Compressor (hydraulisch driven)
Rate 4,5 m³ / min
Pressure 10 bar
Rotary table unit
Thrupass 320 mm
Torque 1500 daNm
Revolutions 20 rpm

Additional options

  • Different drill head models
  • Larger pull back/pull down power and speed
  • Different types of winches
  • Different lit of spray pump models
  • Other rotary table units
  • Drill pipe manipulation system
  • Percussion device
  • Winch cable push-out arm
  • Crown sheaves construction that can be rotated and extended
  • Mast dump (mast height adjustment)
  • Automatic greasing system
  • Automatically operated drill pipe manipulator
  • Automatically operated restart of drilling process

Media repository

Need more information?

Can we help you with more information regarding the Boxer 100 and its capacities? Please contact us at +31 (0)527 69 71 96, fill in the contact form below or download our brochure.

We treat your data safe and careful. More about this in our privacy statement

* Mandatory ……
Innovation in drilling equipment

Conrad Stanen B.V.

Address Escudo 21
8305 BM Emmeloord, NL
Phone +31 (0)527 69 71 96
Fax +31 (0)527 61 0194
E-Mail info@conrad-stanen.nl
View all contact info

Call me back

We treat your data safe and careful. More about this in our privacy statement

* Mandatory